• ssfckdt@lemmy.blahaj.zone
    link
    fedilink
    English
    arrow-up
    2
    ·
    4 hours ago

    I have BioBlu wedding ring, a sort of steel-cobalt alloy. It usually comes off too easily. I have to be careful when using certain hand sanitizers because more than once it’s just flown completely off.

  • CptOblivius@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    8 hours ago

    I have a titanium wedding ring. I quit wearing it as it is softer than steel. It was getting pretty scratched up from working and weight lifting. They must be thinking of a different alloy like tungsten or high carbon steel, etc.

  • ColeSloth@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    26
    ·
    edit-2
    12 hours ago

    I’ve seen this post before and I’m going to comment the same thing again in this one.

    I’ve worked at three different departments and volunteered at another over the past nearly 20 years. None of them have owned a diamond cutter little Dremel tool or anything. We have no way to cut off a titanium cock ring without the dick going right on with it.

    The hospital (and some fire departments I’m sure) do make them. They exist as purpose made ring cutters and as just diamond Dremel blades. We just don’t have them.

    • blargh513@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      14
      ·
      10 hours ago

      Seems odd that a hospital would have damn near every medical device known to humankind, but not a $10 pack of diamond cutoff wheels for a Dremel.

      • dual_sport_dork 🐧🗡️@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        5 hours ago

        I don’t think you need a diamond wheel, even. The regular emory ones will do it at the expense of being consumable. But knowing how hospitals work I’d doubt they’d use a diamond wheel more than once anyway.

        • TranscendentalEmpire@lemmy.today
          link
          fedilink
          English
          arrow-up
          2
          ·
          2 hours ago

          As someone who works in a hospital and regularly has to cut into titanium… You don’t need any fancy cutting tools to cut it. It’s not even that hard of a material especially when compared to something like medical grade stainless steel.

          You can really get through it pretty easily with a hacksaw.

      • ColeSloth@discuss.tchncs.de
        link
        fedilink
        English
        arrow-up
        11
        ·
        8 hours ago

        Some hospitals are small, but I’d still be inclined to agree. Don’t believe everything you read on the internet.

        Also. They get stuck because the blood can’t drain back out from where it came from. Well hospitals tend to have needles and do blood draws…

      • shalafi@lemmy.world
        link
        fedilink
        English
        arrow-up
        11
        ·
        9 hours ago

        My ex-wife was a scrub tech and later a nurse in surgery. The two biggest hospitals would pay a cab to transport borrowed surgical tools back and forth. This was before Uber and the like, so more expensive than it sounds. Not talking about high-end electronics, talking about hand tools.

        I was floored at the inefficiency. She said it was perfectly normal.

        • chiliedogg@lemmy.world
          link
          fedilink
          English
          arrow-up
          6
          ·
          8 hours ago

          Probably a hot-shot driver and not a cab.

          My Dad was a hot-shot for a while. My favorite run he got was a 2am call to deliver a very specific o-ring from a warehouse in Houston to an industrial site near Corpus. Apparently every second that machine was down was costing a fuckton and they needed that o-ring and the fastest way to get it was to just hire a dude close to the source of the part rfn.

          That o-ring ened up costing nearly 2 grand.

          • captainlezbian@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            7 hours ago

            I’m shocked at the inefficiency of not having spares of things that are relatively cheap compared to the cost of downtime. If downtime is that expensive, you can probably afford to have a maintenance warehouse if even that is necessary.

            • chiliedogg@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              2 hours ago

              In that case I’m sure it was a fluke and heads rolled. Sometimes there’s a fuckup and you’re missing something important.

              • captainlezbian@lemmy.world
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 hour ago

                Oh, no, I’m sure it was business people blindly cutting costs and thinking a central warehouse is good enough

            • GreyEyedGhost@piefed.ca
              link
              fedilink
              English
              arrow-up
              2
              ·
              6 hours ago

              I hear what you’re saying but I guarantee this situation isnt unique. Keep in mind that only the shining stars of capitalism can afford to be thise mdiocre - if they’re too small they simply can’t afford expenses like this.

              • captainlezbian@lemmy.world
                link
                fedilink
                English
                arrow-up
                1
                ·
                5 hours ago

                Yeah I’m aware, I work in manufacturing. I’ve just seen plenty of dumb situations where failure to spend on preparation and maintainance causes unaffordable downtime.

  • melsaskca@lemmy.ca
    link
    fedilink
    English
    arrow-up
    38
    ·
    17 hours ago

    Who needs the fire department? Call the guy’s mother. When she walks into the room then you’ll hear a clanking sound when the object hits the floor due to rapid contraction.

  • XiJinpingStanAccount@lemmy.ml
    link
    fedilink
    English
    arrow-up
    7
    ·
    13 hours ago

    I do wear stainless steel finger rings but I’m a little freak who can’t handle a ring being tight so I wear them so loose they fall off randomly anyway.

  • mad_lentil@lemmy.ca
    link
    fedilink
    English
    arrow-up
    14
    ·
    16 hours ago

    I know it can’t be this easy, but couldn’t they just like… Lance it? Would that help the swelling go down?

    • LastYearsIrritant@sopuli.xyz
      link
      fedilink
      English
      arrow-up
      15
      ·
      14 hours ago

      The gauge of the needle needed to do so can do more damage than other options.

      (don’t) look up compartment syndrome, which is a very similar situation. They literally have to slice open your legs to let the pressure out.

      • Baggie@lemmy.zip
        link
        fedilink
        English
        arrow-up
        13
        ·
        13 hours ago

        I’m thankful I’m on ADHD meds because otherwise I wouldn’t have the impulse control to not look that up.

  • ExLisper@lemmy.curiana.net
    link
    fedilink
    English
    arrow-up
    45
    ·
    19 hours ago

    Wouldn’t it be easier to remove the penis, take of the ring and reattach the penis? Doctor could do it without calling the fire department and creating an embarrassing situation.

  • Cheebus@lemmy.world
    link
    fedilink
    English
    arrow-up
    95
    ·
    22 hours ago

    How would you get a small cylinder (5.1 inches in length, ~4.5in girth) unstuck from a mini M&Ms tube filled with butter and microwaved mashed banana?

  • FaceDeer@fedia.io
    link
    fedilink
    arrow-up
    75
    ·
    22 hours ago

    What a coincidence, “A Very Undesired Experience For Everyone Involved” is the title of my biography.

    • reev@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      15
      ·
      20 hours ago

      What a coincidence, “A Very Undesired Experience For Everyone Involved” is the title of my pornography.

  • Ydna@lemmy.world
    link
    fedilink
    English
    arrow-up
    11
    ·
    17 hours ago

    I work at a tech school, we once had a group from the fire dept come in for a similar reason (they didn’t have the proper tools to remove a titanium ring from a finger). We joked the whole time about cutting off a dong ring. I think I would do it but we had to spray water on the guys hand so it would definitely be a messy job. And a lot of people would be involved.

    • Hannah@lemmy.world
      link
      fedilink
      English
      arrow-up
      7
      ·
      13 hours ago

      FF1: now stay very still, this is a delicate procedure

      FF2: * starts circular saw nearby, out of view of the patient *

        • shalafi@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          9 hours ago

          Typical day. “Oh, just some terrorists decided to send a little care package. Box of goodies. Which had to be neutralized before blowing up the office…”

  • digdig@piefed.social
    link
    fedilink
    English
    arrow-up
    7
    ·
    16 hours ago

    I can’t understand this need. My own one is far too variable in size and I’m rather old.

    • Trainguyrom@reddthat.com
      link
      fedilink
      English
      arrow-up
      6
      ·
      13 hours ago

      Different strokes for different folks of course but the raging hard on and extended release that cockrings permit can be quite fun.

      Probably TMI Explanation

      Personally, I have the challenge of a combination of factors

      • my wife exclusively cums through penetration
      • I am intensely aroused by my partner’s arousal (sometimes I swear it’s basically 1:1)
      • the best way to bring my wife to orgasm is through sustained extremely vigorous penetration

      So the end result is, without something to delay my own orgasm (alcohol, gummies, numming lube or a cockring), she gets left unsatisfied

      • shalafi@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        9 hours ago

        Very lucky for you! I’ve only had one lover like that and making her cum was hilariously easy. One night I set her off 8 times for giggles. Pictured: Me looking at her passed out

    • Croquette@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      4
      ·
      15 hours ago

      It’s a nice feeling for both partner. It gives me a primal raw feeling for whatever reason and my partner likes it because its harder.

      You can buy rubber/silicone one or some that you can adjust. No need to trap your junk in a metal ring.