- A different device from your home server?
- On the same home server as the services but directly on the host?
- On the same home server as the services but inside some VM or container?
Do you configure it manually or do you use some helper/interface like WGEasy?
I have been personally using wgeasy but recently started locking down and hardening my containers and this node app running as root is kinda…
You must log in or register to comment.
I run a wireguard container on my old desktop server and wgeasy in a pi2 as backup.
One instance runs on the router (Unifi USG) and the other on a Pi3 (as a backup) using PiVPN.
Usually, if I need to set it up, I’ll use PiVPN and either a Pi or Debian/Ubuntu host.
If your router is down how do you get to your pi backup?
That’s the fun part. I’m creating a mesh where multiple things are server and client.
K8s, mikrotik, home assistant, frigate, pangolin, etc.
I don’t get the mesh if everything is behind your router or firewall what is the point.
OPNsense
This is the way.
What are you wanting to use Wireguard for?
On my opnsense router
On my router
Always in the router if it supports it. If it does not support wireguard I would rather (if you are able and allowed to) replace the router instead of using something else.
Can you elaborate on why?
It’s my outside device it allows things into my network might as well terminate the VPN there. I mean if my router is down I’m not getting to the VPN endpoint inside my network.
Maybe easier to setup because routers that support vpns come with nice-ish web uis.
That said, if you have a server (pc, pi, etc), setting up wireguard with wg-easy is mostly painless (comes with a nice web ui), so there is no reason to replace your router in this case!
Instead of replacing a router, I’d prefer buying a pi anyways.
Unless you want to route all outbound traffic through a vpn with zero config on devices, I can’t see why you’d replace a router.
Final note: most people prefer hosting a vpn on a server, even if their router supports it as far as I’m aware at least (edit: this might be erong judging from the rest of the comments saying they use their router).
On my router, my FritzBox came with WG support built in.
I have a Raspberry Pi that runs pihole and Wireguard exclusively. My home server is a Kubernetes cluster running on an old desktop PC and 2 Intel NUCs.
The reason for the separate Pi was essentially because I only had the desktop PC initially, and for a while I had a faulty CPU, making the desktop PC crash or become unresponsive, so it helped a lot having DNS and VPN access separated from the instability.
I have a vps (hetzner dedicated server auction) as well as my home servers. The vps has a fixed IP so ive setup wireguard endpoints to all point to it with forwarding on so can access every device indirectly through the vps. It allows them to work across DDNS or remotely.
I used this guide (https://www.digitalocean.com/community/tutorials/how-to-set-up-wireguard-on-ubuntu-20-04). Tried different tools gui’s and other methods but always came back to this to work the best
Vps with public ipv4 v6. Avoids all the dyndns mess.
On my (OpenWrt) router, configured using the OpenWrt interface
One end is a local VPS with insanely good peering pretty much round the damn world, other end is my opnsense router. I actually pass a block of ipv6 through the vpn and my router hands it out to devices which is a nice little bonus
Who is your VPS provider, if you don’t mind telling?
https://spartanhost.org/ owner is super chill will make custom spec deployments and they actually have a really nice management panels with nice easy custom iso support
Thanks!
I run the server on an old Pi. That’s its only job.
