It’s usually considered a poor idea to use it also as an AP.

The location usually isn’t great for your WiFi and there are better tools for the job.

OpnSense would be the easiest way if you wanted to go. It’s still not easy, but the articles online should help you out.

First you’d need a machine. I’ve got an m920q I bought off eBay for $135 after shipping.

The computer will likely only have one Ethernet port. And it’s likely the port is Realtek which isn’t supported well.

So, you’ll need to get yourself a NIC (a fancy term for a network card). There are good forum posts and articles online about the best NICs to buy for your needs. Intel is a must. However, you can find many of their NICs online labeled as another brand - usually HP, Lenovo, or Dell. Again, the forum posts will tell you what to look for.

If you bought the same computer I mentioned above, you’ll also need a riser and a bezel. Amazon and eBay will have a good selection.

Now assemble it. Flash the computer with OpnSense. Don’t plug it in as your router yet. Follow along with some basic setup guides online to figure out how you want it configured.

Once you’re happy, plug it in as your router and test that it works. If not, you’ll need to put your old router back in place until you can figure out what you need to change.

It’s die.

Oddly enough it was blurry if I looked at it from the feed but completely fine when I opened it from the post itself.

Also running Sync but with that setting enabled.

I use it because I don’t want ads related to my stupid ass search.

Well that personal attack was uncalled for.

A few years back they dropped some clients (including the one for my old TV) because they were dropping support for legacy SSL ciphers on their servers

TLS 1.0/1.1? Those were deprecated and dropped by the IETF with RFC 8996. You can’t even get a certificate using 1.0/1.1 anymore unless you are self-signing.

You can also allow unauthenticated users on certain networks, usually limited to your local nets. But I do agree that doesn’t solve the problem. I’d love to allow users to optionally use local authentication with, eg, Authelia, something built in, or an LDAP backend.

I installed Jellyfin on my server but the Android TV app is just so awful.

It honestly feels like a webpage from 2005 with all the blocky elements, terrible scrolling, and no way to sort.

If you want to go to, say, Workaholics, you have to scroll through your entire library until you get there. There’s no option to go straight to W. And, don’t worry, the scrolling is very slow the whole time!

The search seems to work maybe 10% of the time. I’ve typed in the name of a movie and it wouldn’t find it, but it did find episodes of shows that kinda match. I’ve typed in names of TV shows and it’s found nothing. Both times, the movies and shows existed in my library.

If they can make it look and work better, I’d be happy to switch to it fully. All I’d need then is a way to pull the XMLTV file from Plex so I can record, too.

The Plex app for the Shield has a lot of bugs itself, though. I connected my Shield to a smart plug because it froze the system often enough that I needed to automate a way to restart it. Unfortunately I’d rather put up with that than the Jellyfin UI.

They make it super easy to turn off catching and DNS proxy if you’re worried about that, too. And they at least make their goals clear.

They don’t provide free services out of the goodness of their hearts, but because some users will go back to their company and convince them to get their paid services.

It’s the same reason a lot of software is free for college students and educators.

You’ve never operated a public-facing website, have you?

In the past 24 hours alone, I’ve had at least 344 bot attempts on my personal site. A handful are harmless crawlers but most are hoping to hit a vulnerability.

Captchas are necessary to prevent malicious bot activity. It’s unfortunate that it also means it’ll be a pain for users.

The benefit of Wireguard is that if you screw it up, it just won’t work. It basically enforces security.

Well, unless you tried to use the original PFSense module.

It’s a great little machine. The downside, though, is that it’s not that powerful at all. With hardware offload enabled and features like QoS turned off, you’ll get about ~600mbps of max total bandwidth shared between up/down.

For most people that shouldn’t be an issue, though.

You could also use OpnSense and install AdGuard Home on that.

Won’t be an issue for courts. In fact, the original text prediction software came from the Enron Corpus - a trove of emails gathered by the FERC during their lawsuit against Enron.

Now, companies will absolutely not be friendly about this. The number one reason most companies are hesitant to AI is because they don’t want to risk giving sensitive data to an outside company.